2003 - 2010
HUSQVARNA TE 250
Steel plus chain kit
| SUNSTAR SPROCKETS
SUNSTAR SPROCKETS
Fits to:
HUSQVARNA TE 250 [2003 - 2005]
HUSQVARNA TE 250 [2006 - 2010]
HUSQVARNA TE 250 I.E. [2008 - 2010]
2017 - 2018 HUSQVARNA TE 250
Transmision ratio:
| 11 | 12 | 13 | 14 | 15 | 16 | ||
| 38 | 3.45 -7.0% | 3.17 -14.7% | 2.92 -21.3% | 2.71 -26.9% | 2.53 -31.8% | 2.38 -36.1% | |
| 40 | 3.64 -2.1% | 3.33 -10.3% | 3.08 -17.2% | 2.86 -23.1% | 2.67 -28.2% | 2.50 -32.7% | |
| 41 | 3.73 +0.3% | 3.42 -8.0% | 3.15 -15.1% | 2.93 -21.2% | 2.73 -26.4% | 2.56 -31.0% | |
| 42 | 3.82 +2.8% | 3.50 -5.8% | 3.23 -13.0% | 3.00 -19.2% | 2.80 -24.6% | 2.62 -29.3% | |
| 44 | 4.00 +7.7% | 3.67 -1.3% | 3.38 -8.9% | 3.14 -15.4% | 2.93 -21.0% | 2.75 -26.0% | |
| 45 | 4.09 +10.1% | 3.75 +1.0% | 3.46 -6.8% | 3.21 -13.5% | 3.00 -19.2% | 2.81 -24.3% | |
| 46 | 4.18 +12.6% | 3.83 +3.2% | 3.54 -4.7% | 3.29 -11.5% | 3.07 -17.4% | 2.88 -22.6% | |
| 47 | 4.27 +15.0% | 3.92 +5.4% | 3.62 -2.7% | 3.36 -9.6% | 3.13 -15.6% | 2.94 -20.9% | |
| 48 | 4.36 +17.5% | 4.00 +7.7% | 3.69 -0.6% | 3.43 -7.7% | 3.20 -13.8% | 3.00 -19.2% | |
| 49 | 4.45 +19.9% | 4.08 +9.9% | 3.77 +1.5% | 3.50 -5.8% | 3.27 -12.1% | 3.06 -17.5% | |
| 50 | 4.55 +22.4% | 4.17 +12.2% | 3.85 +3.6% | 3.57 -3.8% | 3.33 -10.3% | 3.12 -15.9% | |
| 51 | 4.64 +24.8% | 4.25 +14.4% | 3.92 +5.6% | 3.64 -1.9% | 3.40 -8.5% | 3.19 -14.2% | |
| 52 | 4.73 +27.3% | 4.33 +16.7% | 4.00 +7.7% | 3.71 standard | 3.47 -6.7% | 3.25 -12.5% | |
| 53 | 4.82 +29.7% | 4.42 +18.9% | 4.08 +9.8% | 3.79 +1.9% | 3.53 -4.9% | 3.31 -10.8% | |
Specifications
| Manufacturer | SUNSTAR SPROCKETS |
|---|---|
| Seal type | W-Ring |
| Color | Gold| Raw |
| Material | Steel |
| Max engine cc | 400 cc| 750 cc |
| Model | XTG Series |
| Size | 520 |
| Tensile strength | 37,7 kN (8490 lb) |
| Chain type | 520 XTG |
| Units | Kit |
| Master link connector | Clip |
Product description
Include Sunstar drive sprocket, rear sprocket and chain in their original size
When viewing the cross section of the ring there are two sealing lips and lubrication pools per side versus a single-lip design, achieving lower friction and longer life