2014 - 2022
HUSQVARNA TE 250
Galinė plieninė žvaigždutė - 48 dantys
| RENTHAL
Tinka:
HUSQVARNA TE 250 I [2018 - 2018]
HUSQVARNA TE 250 I [2018 - 2018]
HUSQVARNA TE 250 [2018 - 2018]
HUSQVARNA TE 250 [2014 - 2017]
HUSQVARNA TE 250 I [2018 - 2022]
2021 - 2022 HUSQVARNA TE 250
Perdavimo santykis:
| 11 | 12 | 13 | 14 | 15 | 16 | ||
| 38 | 3.45 -7.0% | 3.17 -14.7% | 2.92 -21.3% | 2.71 -26.9% | 2.53 -31.8% | 2.38 -36.1% | |
| 40 | 3.64 -2.1% | 3.33 -10.3% | 3.08 -17.2% | 2.86 -23.1% | 2.67 -28.2% | 2.50 -32.7% | |
| 41 | 3.73 +0.3% | 3.42 -8.0% | 3.15 -15.1% | 2.93 -21.2% | 2.73 -26.4% | 2.56 -31.0% | |
| 42 | 3.82 +2.8% | 3.50 -5.8% | 3.23 -13.0% | 3.00 -19.2% | 2.80 -24.6% | 2.62 -29.3% | |
| 44 | 4.00 +7.7% | 3.67 -1.3% | 3.38 -8.9% | 3.14 -15.4% | 2.93 -21.0% | 2.75 -26.0% | |
| 45 | 4.09 +10.1% | 3.75 +1.0% | 3.46 -6.8% | 3.21 -13.5% | 3.00 -19.2% | 2.81 -24.3% | |
| 46 | 4.18 +12.6% | 3.83 +3.2% | 3.54 -4.7% | 3.29 -11.5% | 3.07 -17.4% | 2.88 -22.6% | |
| 47 | 4.27 +15.0% | 3.92 +5.4% | 3.62 -2.7% | 3.36 -9.6% | 3.13 -15.6% | 2.94 -20.9% | |
| 48 | 4.36 +17.5% | 4.00 +7.7% | 3.69 -0.6% | 3.43 -7.7% | 3.20 -13.8% | 3.00 -19.2% | |
| 49 | 4.45 +19.9% | 4.08 +9.9% | 3.77 +1.5% | 3.50 -5.8% | 3.27 -12.1% | 3.06 -17.5% | |
| 50 | 4.55 +22.4% | 4.17 +12.2% | 3.85 +3.6% | 3.57 -3.8% | 3.33 -10.3% | 3.12 -15.9% | |
| 51 | 4.64 +24.8% | 4.25 +14.4% | 3.92 +5.6% | 3.64 -1.9% | 3.40 -8.5% | 3.19 -14.2% | |
| 52 | 4.73 +27.3% | 4.33 +16.7% | 4.00 +7.7% | 3.71 standard | 3.47 -6.7% | 3.25 -12.5% | |
| 53 | 4.82 +29.7% | 4.42 +18.9% | 4.08 +9.8% | 3.79 +1.9% | 3.53 -4.9% | 3.31 -10.8% | |
Specifikacijos
| Gamintojas | RENTHAL |
|---|---|
| Spalva | Orange |
| Medžiaga | 7075-T6 Aluminum |
| Padėtis | Rear |
| Dantų skaičius | 48 |
| Vienetai | Each |
| Tipas | Drive |
| Grandinės žingsnis | 520 |
Produkto aprašymas
Inner ring is the same high strength Ultralight™ 7075 T-6 aluminum used for the standard Renthal sprocket Outer ring is electro-less nickel coated steel for ultimate durability and is designed with the minimum amount of material to keep weight down The outer ring is expanded at 200°C and then fitted over the inner; this interference fit combined with the wave pattern ensures a permanent bond for the life of the chainwheel The flat socket head screws add additional strength to the chainwheel during side impacts and eliminates contact with the chain guide Self cleaning mud grooves between each tooth prevent dirt build upand reduce chainwheel wear and weight Will outlast a standard all aluminum sprocket by 3 times, yet is much lighter than an all steel rear sprocket